1
sélectionner Make
    2
    sélectionner Model
      3
      sélectionner Year
        0

        Sélectionnez votre véhicule

        Dossiers de véhicules (0)
        • Canalisation
        Sélectionnez votre véhicule
        1
        sélectionner Make
          2
          sélectionner Model
            3
            sélectionner Year
              0
              Chariot de renseignements
              0 Articles dans votre panier

              Retrofit Auto Power Tailgate Sedan Electric Tailgate Retrofit Kit Kick Sensor for GAC Trumpchi GA6 II Mk2 Upgrade

              Propriétés commerciales

              •Quantité de commande minimale: 1 ensemble
              •Prix: US$150-230 / Set
              •Standard Packaging: 1 jeu par carton 76x21x18 cm, actionneurs gainés en EPE, 6 cartons par carton principal
              •Délai de livraison: 7-14 jours ouvrables
              •Conditions de paiement: T/T, L/C, Western Union, PayPal
              •Capacité à fournir: 1300 ensembles par mois

              Propriétés de base

              •Part Number: for GAC Trumpchi GA6 II Mk2
              Have a Question? Ask Us

              Mr. Wong

              Caractéristiques
              Model: GAC Trumpchi GA6 II Mk2 OEM/ODM: Prise en charge à partir de 20 sets
              Actuator Force: 430 N par côté Stroke: 300 millimètres
              Door Mass Supported: jusqu'à 26 kg Power: 12 V CC, 15 A avec fusible
              Open Close Time: 5 s ouvert, 6 s fermé Noise Level: Moins de 52 dB
              Cycle Test: 55 000 opérations Warranty: 24 mois
              High Light:

              Automatic Trunk Opener Set

              ,

              Auto Tailgate Lift

              ,

              Electric Car Trunk Opener

              Description de produit
              Electric Tailgate Retrofit Kit for the GAC Trumpchi GA6 II (Mk2) Second-generation GA6 owners get a powered boot with this bolt-on kit. The gas springs come out, two electric actuators go in, and a control module adds key, switch and foot-sensor commands along with a damped final latch pull. Generation-Specific Fitment This set is prepared for the GA6 II (Mk2) body rather than the first generation. Hinge brackets follow the Mk2 bolt pattern and the harness is cut to the Mk2
              Recently Viewed Products