1
selecteer Make
    2
    selecteer Model
      3
      selecteer Year
        0

        Selecteer uw voertuig

        Voertuiggegevens (0)
        • Belangrijkst
        Selecteer uw voertuig
        1
        selecteer Make
          2
          selecteer Model
            3
            selecteer Year
              0
              Verzoeksmandje
              0 Artikelen in uw winkelwagen

              Retrofit Auto Power Tailgate Sedan Electric Tailgate Retrofit Kit Kick Sensor for GAC Trumpchi GA6 II Mk2 Upgrade

              Handelsgoederen

              •Minimale bestelhoeveelheid: 1 set
              •Prijs: US$150-230 / Set
              •Standard Packaging: 1 set per doos 76x21x18 cm, actuatoren omhuld in EPE, 6 dozen per omdoos
              •Leveringstermijn: 7-14 werkdagen
              •Betalingsvoorwaarden: T/T,L/C,Western Union,PayPal
              •Toeleveringsvermogen: 1300 reeksen per maand

              Basiseigenschappen

              •Part Number: for GAC Trumpchi GA6 II Mk2
              Have a Question? Ask Us

              Mr. Wong

              Specificaties
              Model: GAC Trumpchi GA6 II Mk2 OEM/ODM: Ondersteuning vanaf 20 sets
              Actuator Force: 430 N per zijde Stroke: 300 mm
              Door Mass Supported: tot 26 kg Power: 12V DC, 15A gezekerd
              Open Close Time: 5s open, 6s dicht Noise Level: Onder 52 dB
              Cycle Test: 55.000 operaties Warranty: 24 maanden
              High Light:

              Automatic Trunk Opener Set

              ,

              Auto Tailgate Lift

              ,

              Electric Car Trunk Opener

              Productomschrijving
              Electric Tailgate Retrofit Kit for the GAC Trumpchi GA6 II (Mk2) Second-generation GA6 owners get a powered boot with this bolt-on kit. The gas springs come out, two electric actuators go in, and a control module adds key, switch and foot-sensor commands along with a damped final latch pull. Generation-Specific Fitment This set is prepared for the GA6 II (Mk2) body rather than the first generation. Hinge brackets follow the Mk2 bolt pattern and the harness is cut to the Mk2
              Recently Viewed Products