Tail Gate Power Open Retrofit Kit for Jetour Traveller T2 2024-2026 Electric Trunk Remote
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| System Voltage: | 12V DC | Rated Thrust: | 420 N Per Actuator |
| Cycle Time: | 7-9 Seconds Each Direction | Remote Range: | Up To 30 Metres |
| Sealing Rating: | IP55 Module, IP65 Actuators | Net Weight: | 7.6 Kg Per Set |
| Door Mass Supported: | Up To 49 Kg | Operating Temperature: | -30 C To +80 C |
| Control Inputs: | Remote Fob, Cabin Switch, Tailgate Handle Switch | Safety Features: | Bidirectional Obstruction Reversal, Over-current Cut-off, P-gear Interlock |
| High Light: | Tail Gate Power Open Retrofit,Electric Trunk Remote T2,Auto Tailgate Kit Traveller |
||
Tail Gate Power Open Retrofit Kit for Jetour Traveller T2 2024-2026
The Traveller T2 is built as a boxy lifestyle 4x4, and its rear door is tall, flat and heavy — one of the more demanding panels in the Jetour range to open by hand on a slope or with an armful of gear. This retrofit kit replaces the factory gas struts with a synchronised motorised actuator pair, adds a control module set for the T2 mounting points, and keeps the original wiring untouched by using a plug-in harness adapter.
Product Advantages
- Tail gate power open retrofit engineered for the T2 — brackets follow the factory mounting points on the 2024-2026 body, so no drilling, welding or panel cutting is required.
- Electric trunk remote control — the supplied fob works up to 30 metres on rolling code, while the original handle switch and cabin button stay fully functional.
- Synchronised actuator pair — both struts are driven from one output stage, keeping the heavy door level through the full travel instead of twisting on one hinge.
- Obstruction reversal on both strokes — current signature monitoring stops and reverses the panel on contact, protecting people, pets and equipment in the load bay.
- Height memory — the opening angle can be limited for low car parks and roof racks, and the stored setting survives a battery disconnect.
- Manual release retained — the original handle mechanism still works if power is lost, so the boot is never locked out.
Specifications
| Parameter | Specification |
|---|---|
| Fitment | Jetour Traveller T2, model years 2024-2026 |
| System Voltage | 12V DC |
| Actuators | Twin motorised lift actuators, ball-socket ends |
| Rated Thrust | 420 N per actuator |
| Rear Door Mass Supported | Up to 49 kg |
| Remote Range | Up to 30 metres, rolling code |
| Control Inputs | Remote fob, cabin switch, tailgate handle switch |
| Cycle Time | 7-9 seconds each direction |
| Safety | Bidirectional obstruction reversal, over-current cut-off, P-gear interlock |
| Sealing | IP55 module, IP65 actuators |
| Operating Range | -30 C to +80 C |
| Net Weight | 7.6 kg per set |
Installation Notes
Off-road styled SUVs often carry accessories on the rear door, so check the current panel weight against the 49 kg rating before fitting — a spare wheel or storage box bolted to the door may need to be removed or countered. Support the door before releasing the original struts, set the module preset for the T2, then fit the brackets to the factory mounting points following the printed position guide. The harness adapter plugs into the existing rear-door connector; only the fused power lead and ground are wired separately. First fit is around 2 hours, repeat fits 70-85 minutes, fully reversible.
Target Market
Exporters serving off-road and overland accessory channels in the Middle East, CIS, Latin America and Southeast Asia; 4x4 modification shops; camping and outdoor equipment retailers adding vehicle accessories; and distributors covering the growing boxy-SUV segment. Buyers in this segment spend heavily on vehicle accessories, which suits a convenience upgrade at this price band.
Packing and Warranty
Each set ships in a printed carton with foam-cradled actuators, labelled fasteners, the printed position guide and a bilingual fitting manual, inside a five-ply export box with corner boards. Bench testing covers 400 duty cycles, synchronous travel, reversal force, remote pairing and standby current. Production follows ISO 9001:2015; warranty is 24 months on actuators and 12 months on the control module.