Electric Trunk Back Boot Opener Remote Control Power Tail Door Lift Gate Open Retrofit for Ora Good Cat Funky Cat 03
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| Rated Force: | 520 N Per Actuator | Cycle Life: | 50,000 Cycles |
| Opening Time: | About 6 Seconds | Temperature Range: | -25°C To +70°C |
| Sealing: | IP65 | Voltage: | 12V DC |
| Set Weight: | 5.9 Kg | Door Mass Supported: | Up To 34 Kg |
| Bracket Material: | Steel, Powder Coated | Protection Features: | Anti-pinch Reverse, Current Limit, 15A Fuse |
| High Light: | Electric Tailgate Kit Solution,Automatic Trunk Opener Hardware,Car Electric Trunk Upgrade |
||
Electric Trunk Back Boot Opener for the Ora Good Cat
Power tail door lift gate open retrofit · Good Cat / Funky Cat / 03
The Ora Good Cat, renamed Funky Cat in the UK and Europe and sold as the Ora 03 in several other markets, is a five door electric hatchback with a full width glass tail gate. The door itself is light compared with an SUV, but it is tall, the handle sits high, and the manual struts are soft enough that the panel often needs a second push to latch. For city drivers carrying shopping, a pram or a folded bike, that is a small annoyance repeated several times a day.
This kit gives the hatchback the electric opening that the cabin design suggests it should have. Two compact actuators replace the factory struts on the original ball studs, a small controller hides behind the rear trim, and the loom uses the factory connector. Nothing on the shell is modified, so the conversion is reversible.
Feature summary
Compatibility
| Vehicle | Ora Good Cat, Funky Cat and Ora 03 hatchback |
|---|---|
| Model years | 2021 to present, confirm year at order |
| Kit contents | 2 compact actuators, controller, harness, brackets, dash switch, fastener bag, guide |
| Fit time | About 1.5 hours, no trim cutting |
| Optional | Kick sensor module for hands free opening, sold separately |
Technical data
| Parameter | Value |
|---|---|
| Actuator type | Electric lift actuator pair, hatchback |
| Force per actuator | 520 N |
| Door mass supported | Up to 34 kg |
| Supply voltage | 12V DC, negative ground |
| Full open time | About 6 seconds |
| Working temperature | -25°C to +70°C |
| Design life | 50,000 open and close cycles |
| Sealing | IP65 actuator and plug |
| Control inputs | Smart key, boot button, dash switch, optional kick sensor |
| Safety | Anti pinch reverse, current limit, 15A fuse |
| Bracket finish | Steel bracket, powder coated |
| Set weight | 5.9 kg per set |
Installation in four steps
- Support the tail gate and release both factory struts from their ball studs.
- Fit the brackets and seat the compact actuators in the original strut position.
- Route the harness through the tail gate grommet and connect it to the controller.
- Fit the dash switch, set the height limit, cycle twice and check the pinch reverse.
Packing and trade terms
Each set is packed in a printed carton with EVA foam, 76x21x19 cm, two sets to a master carton, fasteners bagged by mounting position and a guide in English, Russian or Spanish. Every set is cycled on the bench and checked for force, current draw and reverse response before sealing. Neutral cartons, private label printing, own part numbers and translated manuals are available for importers, with actuators, controllers and switches kept in stock for quick warranty handling.