1
Select Make
    2
    Select Model
      3
      Select Year
        0

        Select Your Vehicle

        Vehicle Records (0)
        • Main
        Select Your Vehicle
        1
        Select Make
          2
          Select Model
            3
            Select Year
              0
              Inquiry Cart
              0 Items In Your Cart

              Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open Retrofit Kick Sensor for Haval H2

              Trading Properties

              •Minimum Order Quantity: 1 Set
              •Price: US$150-230 / Set
              •Standard Packaging: Neutral carton with foam end caps, single carton 82x23x21 cm, 2 sets per master carton
              •Delivery Time: 5-10 working days after payment
              •Payment Terms: T/T,Western Union,Trade Assurance
              •Supply Ability: 2200 Sets per Month

              Basic Properties

              •Part Number: for Haval H2
              Have a Question? Ask Us

              Mr. Wong

              Specifications
              Rated Force: 580 N Per Strut Working Voltage: 12V DC
              Opening Time: About 6 Seconds Operating Temperature: -25°C To +75°C
              Cycle Life: 45,000 Cycles Ingress Protection: IPX4
              Actuator Type: Motorised Strut Pair Control Method: Key Fob, Handle Switch, Cabin Button
              Protection Features: Obstacle Reverse, Speed Limit, 15A Fuse Bracket Material: Zinc Plated Steel
              High Light:

              Electric Trunk Lift Struts

              ,

              Auto Tailgate Opening Kit

              ,

              Automatic Tail Gate Lift System

              Product Description

              Electric Trunk Drive Back Door for the Haval H2

              Power tail door lift gate open retrofit · remote control

              The Haval H2 is one of the most widely exported compact SUVs from the Great Wall line, with strong populations in Russia, Chile, Peru, Ecuador, Iran and West Africa. Almost every unit shipped with a manual tail door and a pair of gas struts, and those struts lose pressure after a few winters, so the door starts to sag or drop on the owner's shoulder. This retrofit replaces them with motorised actuators plus a control module, giving the rear door electric open and close at the touch of the original key, while keeping every factory mounting point.

              Because the H2 rear door is lighter than the larger Haval bodies, the actuators run a lower force curve and a slower final travel, so the door settles onto the seal instead of bouncing. The kit is supplied pre assembled and tested, and the harness uses matching plugs for the factory connector, with no cutting into the vehicle wiring at any stage.

              What the kit changes for the driver

              Electric trunk lift struts with matched force curve

              Two motor driven struts rated 580 N each take over from the original gas units, calibrated for the H2 door weight so the panel rises steadily and holds its position when released halfway.

              Auto tailgate opening kit responds to the factory fob

              A long press on the original remote lifts the door, a second long press closes it, and the tail door handle switch continues to work as an electric trigger, so the owner keeps the same habits with no extra key.

              Automatic tail gate lift system height memory

              The opening limit can be stored for low car parks and garage doors, then cleared when full clearance returns. The closing edge is monitored for obstacles and reverses on contact before the latch reaches the striker.

              Fitment and kit contents

              VehicleHaval H2 rear tail door
              Model years coveredH2 and H2s variants, confirm year before order
              In the carton2 motorised struts, control module, pre wired harness, mounting brackets, cabin button, fastener bag, fitting guide
              Tools neededSocket set, trim lever, 30 minutes per door plus wiring time

              Technical data

              ParameterValue
              Actuator typeMotorised strut replacement, supplied as a pair
              Rated force580 N per strut
              Working voltage12V DC, negative ground
              Opening timeAbout 6 seconds to full height
              Operating temperature-25°C to +75°C
              Service life45,000 open and close cycles
              Ingress protectionIPX4 actuator sealing
              Control inputsKey fob, tail door handle switch, cabin button
              ProtectionObstacle reverse, speed limit, 15A fuse

              Fitting sequence

              • Support the tail door, then release both original gas struts from their ball studs and set them aside.
              • Mount the brackets supplied with the kit and fit the motorised struts in the same position and orientation.
              • Feed the harness through the tail gate grommet along the factory loom and connect the module.
              • Wire the cabin button, store the opening height, then run the door twice and confirm the obstacle reverse works.
              H2 and H2s rear doors differ in some markets, and vehicles fitted with a rear spoiler extension, ladder or spare wheel carrier need a photo check before dispatch. Tell us the model year, drive side and quantity, and our engineers will confirm the correct strut set; a video call can support a first installation.

              Packing, warranty and supply

              Two struts sit in foam end caps inside a neutral carton of 82x23x21 cm, two sets to a master carton, with fasteners bagged by mounting position and a printed guide in English, Spanish or Russian. Each set is load tested on the bench for force curve, current draw and obstacle reverse before sealing. Private label printing, custom part numbers and translated manuals are available for distributors, and replacement struts or modules ship from stock so warranty claims are settled in days. Warranty runs 24 months against manufacturing defects.

              Request the current wholesale band and loading schedule for the Haval H2 kit, and we will reply within one working day with the specification sheet and packing list.

              Recently Viewed Products