Electric Trunk Power Tail Gate Kits Haval H6S Remote Control Power Lift Gate Open Retrofit for Haval GT
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| Actuator Count: | 2 Motorised Lift Struts | Rated Force: | 610 N Per Strut |
| Voltage: | 12V DC | Opening Time: | About 8 Seconds Full Stroke |
| Temperature Range: | -30°C To +75°C | Cycle Life: | 48,000 Open And Close Cycles |
| Bracket Material: | Powder Coated Steel | Control Inputs: | Remote Key Long Press, Dash Switch, Hatch Button |
| Safety Features: | Anti Pinch Reverse, Park Interlock, Overload Cut Off | Height Memory: | Programmable Maximum Lift Angle |
| High Light: | Haval H6S electric trunk lift kit,Remote control power lift gate,Haval GT power tailgate conversion |
||
Electric Trunk Power Tail Gate Kit for Haval H6S / Haval GT
Remote control power lift gate retrofit · motorised struts · factory harness
The Haval H6S, marketed in several export regions as the Haval GT, is a coupe styled SUV whose rear hatch is large, heavy, and awkward to close by hand when the boot is full. This electric trunk kit replaces the two original gas struts with motorised lift units and adds a control module that works with the factory remote, so the hatch rises on command instead of by muscle. The retrofit reuses the stock mounting points and the stock latch, which means the body shell, paint and security system all stay as they left the factory.
Both nameplates share the same rear body, so one kit covers H6S and GT vehicles built on that platform. The bracket geometry has been verified on the actual hatch, keeping the panel gap even and preventing the strut from rubbing the D pillar trim at full extension.
- Resistance sensing halts and reverses the hatch when anything is caught in the closing edge.
- Powertrain signal interlock blocks powered movement unless the vehicle is stationary in park.
- Overload cut off protects the motor when the hatch is obstructed for a long time.
- Inline fuse on the power lead isolates the retrofit circuit, leaving factory wiring untouched.
| Parameter | Value |
|---|---|
| Application | Haval H6S and Haval GT rear hatch |
| Actuators | 2 motorised lift struts |
| Rated force | 610 N per strut |
| Voltage | 12V DC |
| Opening time | About 8 seconds full stroke |
| Control inputs | Remote key long press, dash switch, hatch button |
| Safety | Anti pinch reverse, park interlock, overload cut off |
| Bracket | Powder coated steel brackets |
| Temperature | -30°C to +75°C |
| Cycle life | 48,000 open and close cycles |
| Warranty | 24 months |
Support the hatch, release the original struts from their ball studs, then install the supplied brackets and the motorised struts. The harness follows the factory loom down the D pillar to the module, and the dash switch occupies a blank panel position. After fitting, the installer stores the opening height and runs a full cycle to confirm the anti pinch stop. Wiring diagrams and a photo instruction sheet are included, and our team supports first time installers by video call.
Each set is packed in a printed carton with foam protection on the struts, and every fastener group carries a position label. Units are function tested before shipment for motor current, harness continuity and anti pinch response. Distributors can order neutral packing or their own branding, and we keep struts, control modules and switches in stock so that service parts ship without waiting for production. Wholesale pricing and container loading plans are available on request.
Share the model year or VIN and we will confirm whether the vehicle is H6S or GT specification and quote the matching kit within one working day.