Auto Liftgate Conversion Kit for Jetour X90 Plus Remote Control Electric Trunk Door
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| System Voltage: | 12V DC | Rated Thrust: | 430 N Per Actuator |
| Tailgate Mass: | Up To 53 Kg | Cycle Time: | 8-10 Seconds Each Direction |
| Remote Range: | Up To 30 Metres | Sealing Rating: | IP55 Module, IP65 Actuators |
| Operating Temperature: | -30 C To +80 C | Net Weight: | 7.9 Kg Per Set |
| Control Inputs: | Remote Fob, Cabin Switch, Tailgate Handle Switch | Bench Test: | 400 Duty Cycles |
| High Light: | Electric Trunk Door Conversion,Automatic Liftgate Opener Remote,Auto Tailgate Kit X90 Plus |
||
Auto Liftgate Conversion Kit for Jetour X90 Plus
The X90 Plus is a large three-row SUV, and its tailgate is one of the biggest panels in the Jetour range. Converting it to power operation needs more than a generic strut swap: the actuators must hold a heavy panel level across a wide hinge span, and the control module must manage a longer travel arc without overshooting. This conversion kit is specified for exactly that — twin actuators with a wide bracket spread, a module configured for the X90 Plus body, and a wiring adapter that plugs into the factory tailgate connector.
Key Benefits
- Electric trunk door conversion with wide-span brackets — the bracket set spreads the load across the factory mounting points so the large panel travels level through the whole stroke.
- Automatic liftgate opener with remote control — the supplied fob works up to 30 metres on rolling code, and the cabin button and original handle switch remain fully functional.
- Auto tailgate kit for X90 Plus — brackets bolt to the original ball studs; no drilling, welding or body modification on the vehicle.
- Obstruction reversal on both strokes — current monitoring detects contact during opening as well as closing, protecting people and cargo in low-roof car parks.
- Height memory — the opening angle can be limited for garages and underground parking, and the setting survives a battery disconnect.
- Manual release retained — the original handle mechanism still works if power is lost, so the boot is never locked out.
Specifications
| Parameter | Specification |
|---|---|
| Fitment | Jetour X90 Plus |
| System Voltage | 12V DC |
| Actuators | Twin motorised lift actuators, wide-span brackets |
| Rated Thrust | 430 N per actuator |
| Tailgate Mass Supported | Up to 53 kg |
| Cycle Time | 8-10 seconds each direction |
| Remote Range | Up to 30 metres, rolling code |
| Control Inputs | Remote fob, cabin switch, tailgate handle switch |
| Safety | Bidirectional obstruction reversal, over-current cut-off, P-gear interlock |
| Sealing | IP55 module, IP65 actuators |
| Operating Range | -30 C to +80 C |
| Net Weight | 7.9 kg per set |
Installation Notes
The X90 Plus rear trim is clipped and includes an upper section around the glass that must be released first; a trim lever and a T20 driver cover the job. Support the panel with a second pair of hands before removing the original struts, since it is heavy. Brackets use the existing ball studs, the harness follows the factory clip line along the D-pillar, and the fused power lead terminates at the battery junction box. First fit is about 2.5 hours, repeat fits 80-90 minutes, and the conversion reverses cleanly if needed.
Who It Suits
Exporters serving the Middle East, Central Asia, Latin America and CIS markets where the X90 Plus sells strongly as a family SUV; multi-brand accessory distributors adding Chinese SUV lines; airport transfer and tourism fleets; and mobile fitters serving private owners. Large three-row SUVs attract families and small businesses, both of which value remote opening when loading luggage or equipment.
Packing and Warranty
Each set is packed in a printed carton with foam-cradled actuators, labelled fasteners and a bilingual fitting guide, inside a five-ply export box with corner boards. Bench testing covers 400 duty cycles, synchronous travel, reversal force, remote pairing and standby current. Production follows ISO 9001:2015; warranty is 24 months on actuators and 12 months on the control module, with individual parts available for after-sales.