Electric Tail Gate Kits Remote Control Power Lift Gate Power Trunk Retrofit for Jetour Shanhai L7 2024-2026
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| System Voltage: | 12V DC | Rated Thrust: | 435 N Per Actuator |
| Tailgate Mass: | Up To 55 Kg | Cycle Time: | 8-10 Seconds Each Direction |
| Remote Range: | Up To 30 Metres | Operating Temperature: | -30 C To +80 C |
| Net Weight: | 8.1 Kg Per Set | Sealing Rating: | IP55 Module, IP65 Actuators |
| Control Inputs: | Remote Fob, Cabin Switch, Tailgate Handle Switch | Safety Features: | Bidirectional Obstruction Reversal, Over-current Cut-off, P-gear Interlock |
| High Light: | Electric Tailgate Lift Smart Control,Automatic Trunk Opener Rolling Code,Auto Tailgate Retrofit Shanhai L7 |
||
Electric Tail Gate Kit for Jetour Shanhai L7, 2024 onward
The Shanhai L7 is a large three-row SUV with a wide, high-mounted tailgate, and owners who load strollers, luggage or trade equipment quickly discover that closing it one-handed is not realistic. This kit adds a complete power operation to the 2024-onward model: two motorised actuators with a wide bracket spread, a control module configured for the L7 body, a plug-in harness and a remote fob. Factory hinges, latch and manual release stay untouched, so vehicle security and resale condition are unaffected.
Highlighted Features
- Electric tail gate lift with smart control — the module drives both actuators in sync so the wide L7 panel travels level rather than twisting on one side.
- Automatic trunk opener on rolling code — the supplied fob pairs to the module over a rolling code protocol and works up to 30 metres, with a second fob available for family or fleet use.
- Auto tailgate retrofit for Shanhai L7 — brackets are machined for the L7 hinge position and mount on the factory ball studs, so no drilling or body modification is needed.
- Power lift gate with height memory — the opening angle can be limited for low car parks or garage doors, and the setting is retained after a battery disconnect.
- Obstruction reversal on both strokes — current signature monitoring stops and reverses the panel on contact with a person, pet or obstacle.
- Plug-in harness, no coding — the adapter plugs between the module and the factory tailgate connector; only a fused power lead and ground are wired directly.
Specifications
| Parameter | Specification |
|---|---|
| Fitment | Jetour Shanhai L7, 2024-2026 |
| System Voltage | 12V DC |
| Actuators | Twin motorised lift actuators, wide bracket spread |
| Rated Thrust | 435 N per actuator |
| Tailgate Mass Supported | Up to 55 kg |
| Cycle Time | 8-10 seconds each direction |
| Remote Range | Up to 30 metres, rolling code |
| Control Inputs | Remote fob, cabin switch, tailgate handle switch |
| Safety | Bidirectional obstruction reversal, over-current cut-off, P-gear interlock |
| Sealing | IP55 module, IP65 actuators |
| Operating Range | -30 C to +80 C |
| Net Weight | 8.1 kg per set |
Installation Overview
The L7 rear trim is clipped and includes a separate upper panel around the glass; both release with a trim lever after the grab-handle screws are removed. Brackets bolt onto the original strut studs, the harness follows the factory clip line, and the fused lead terminates at the battery junction box. Because the panel is heavy, two people should support it while the original struts are removed. First fit takes around 2.5 hours, repeat fits 75-90 minutes, and the conversion is fully reversible.
Market Positioning
Exporters supplying the Middle East, Central Asia, Latin America and Russia/CIS, where Jetour SUV volumes have grown sharply; multi-brand accessory distributors adding Chinese SUV ranges; tourism and airport transfer fleets running three-row SUVs; and mobile fitters serving private owners. The L7 is a premium-positioned model in its segment, so buyers expect a near-factory feel rather than a basic aftermarket conversion, and the remote fob plus height memory are strong selling arguments at this price point.
Packing and Service
Kits ship in a printed carton with foam-cradled actuators, labelled fasteners and a bilingual fitting guide, inside a five-ply export box with corner boards. Every set is cycle-tested 400 times with verification of reversal force, remote pairing, synchronous travel and standby current. Production is ISO 9001:2015 certified; warranty is 24 months on actuators and 12 months on the control module, with individual parts available for after-sales support.