Electric Tail Gate Kits for Bahman Fidelity Prime for Jetour X70 for Soueast DX8 Remote Control Power Trunk Retrofit
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| System Voltage: | 12V DC | Rated Thrust: | 415 N Per Actuator |
| Tailgate Mass: | Up To 48 Kg | Cycle Time: | 7-9 Seconds Each Direction |
| Remote Range: | Up To 30 Metres | Sealing Rating: | IP54 Module, IP65 Actuators |
| Operating Temperature: | -30 C To +80 C | Net Weight: | 7.3 Kg Per Set |
| Actuator Type: | Twin Motorised Lift Actuators | Fitment Presets: | 3 Presets Via DIP Switch |
| High Light: | Electric Tailgate Kit Multi Fit,Automatic Trunk Opener Universal,Auto Car Lift Boot Retrofit |
||
Electric Tail Gate Kit for Bahman Fidelity Prime, Jetour X70 and Soueast DX8
A single power tailgate kit configured to serve three separate models that share a similar rear hatch layout: the Bahman Fidelity and Prime sold in Iran, the Jetour X70 SUV and the Soueast DX8 crossover. The kit contains a universal control module plus three vehicle-specific bracket sets and wiring adapters, so a distributor can stock one SKU and cover all three fitments without holding three separate part numbers. Actuators are matched to the heaviest of the three panels, and the module is programmed through a simple DIP selector on the housing rather than a diagnostic tool.
Product Highlights
- Electric tail gate kit, multi-fit design — one box covers Bahman Fidelity and Prime, Jetour X70 and Soueast DX8, with the correct bracket set and adapter labelled inside the carton for each model.
- Automatic trunk opener with three-way control — remote key, cabin button and tailgate handle switch all operate the module, and each model's original remote keeps working.
- Auto car lift boot retrofit without coding — fitment mode is selected by a DIP switch, so no laptop, no dealer tool and no firmware flashing is required in the workshop.
- Remote control power trunk — drivers can open or close the tailgate from up to 30 metres with the supplied remote fob, and pair a second fob for fleet use.
- Obstruction reversal — motor current is monitored on both strokes, so the panel stops and reverses on contact with a person or an object.
- Height memory and manual override — the opening angle can be set for low car parks, and the original manual release remains usable if power is lost.
Technical Specifications
| Parameter | Specification |
|---|---|
| Compatible Models | Bahman Fidelity / Prime, Jetour X70, Soueast DX8 |
| System Voltage | 12V DC |
| Actuators | Twin motorised lift actuators with ball-socket ends |
| Rated Thrust | 415 N per actuator |
| Tailgate Mass Supported | Up to 48 kg |
| Fitment Selection | DIP switch on module, three presets |
| Remote Range | Up to 30 metres, rolling code |
| Cycle Time | 7-9 seconds each direction |
| Safety | Bidirectional obstruction reversal, over-current cut-off, P-gear interlock |
| Sealing | IP54 module, IP65 actuators |
| Operating Range | -30 C to +80 C |
| Net Weight | 7.3 kg per set |
Installation Notes
Identify the vehicle first, set the DIP selector to the matching preset, then fit the bracket set carrying that model label. Brackets fix to the original strut ball studs in every case, so no drilling is needed on any of the three vehicles. The harness adapter plugs between the module and the factory tailgate connector; only the fused power lead and ground are wired directly. First fit takes 2 to 2.5 hours, repeat fits 60-80 minutes, and the conversion is reversible on all three models.
Who Buys This Kit
Export wholesalers serving Iran, the Middle East, Latin America and CIS markets where these models are common; multi-brand accessory shops that want one SKU instead of three; fleet operators running mixed SUV pools; and mobile fitters who need flexibility from a single carton. For distributors, the multi-fit design cuts inventory risk significantly compared with model-specific kits.
Packing and Warranty
The carton contains the universal module, three labelled bracket sets, adapters for each model, fasteners and a bilingual fitting guide, protected by die-cut foam inside a five-ply export box. Every set is cycle-tested 400 times with verification of reversal force, sleep current, remote pairing and both actuator strokes. Production follows ISO 9001:2015; warranty is 24 months on actuators and 12 months on the control module.