Hands Free Power Tailgate Tailgate Soft Close Kit Power Tailgate Retrofit for Dongfeng Fengshen Aeolus Haoji
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| Voltage: | 12V DC | Full Stroke Time: | 7-8 Seconds |
| Cycle Rating: | 50000 Cycles | Set Weight: | 4.5 Kg |
| Material: | Galvanised Steel Strut, ABS Controller | Sleep Current: | Below 0.1A |
| Peak Current: | 8A Per Set | Sealing: | IP54 Actuators |
| Thermal Range: | -30 C To +70 C | Carton Dimensions: | 78 X 21 X 19 Cm |
| High Light: | Auto Tailgate Hands Free Opening,Electric Tailgate Kit Soft Close,Car Electric Trunk Retrofit |
||
Hands Free Power Tailgate for Dongfeng Fengshen Aeolus Haoji
Owners of the Aeolus Haoji often describe the same irritation: the tailgate is tall, the handle sits high, and closing it means reaching over a loaded boot. The conversion we supply puts a motor where the gas strut used to be and a controller where the factory wiring already passes. From then on the hatch opens on command and shuts itself with a cushioned finish. No body panel is modified, the original key fob stays in service, and every part can be returned to stock form if needed.
Feature Matrix
| Feature | What It Means on the Haoji |
|---|---|
| Kick-free access | A short sweep of the foot under the bumper releases the latch, so loaded arms stay loaded |
| Soft close | The last centimetres are drawn in electrically; no bang, no latch wear, no paint scuffs |
| Anti-pinch | The panel stops and reverses the moment it meets an obstacle, including pets and roof-mounted racks |
| Height memory | Two positions can be stored, useful for basement car parks and low workshop doors |
| P-gear lockout | The hatch ignores commands unless the selector is in P, avoiding accidental movement |
| Manual fallback | If power is lost, the hatch still opens by hand exactly as before |
| Sleep current | Draw falls below 0.1A after 30 seconds, so the battery is unaffected during storage |
Build Details
The two actuators use a geared motor inside a steel tube, sealed to IP54 and lubricated for a -30 C to +70 C working range. The control box is moulded in ABS and mounted where the factory loom already runs, so the harness is short and the routing hidden. Brackets are stamped from galvanised steel and match the original threaded inserts, which means the installer never has to drill through sheet metal. Fasteners arrive in numbered bags keyed to the illustrated manual.
Specification Summary
Application: Dongfeng Fengshen Aeolus Haoji
Working voltage: 12V DC, negative earth
Drive: Two motorised struts, gear reduction
Full stroke: 7 to 8 seconds
Peak current: 8A per set, 0.1A in sleep
Sealing: IP54 actuators
Thermal range: -30 C to +70 C
Cycle rating: 50,000 open-close cycles tested
Set weight: Approximately 4.5 kg
Warranty: 24 months on parts and workmanship
Questions Buyers Usually Ask
Will it work with the existing fob? Yes. The module reads the factory boot signal, so the original remote keeps its function and no new key is needed.
Does the car still lock normally? Yes. The factory latch and lock motor are untouched, and central locking continues to operate as designed.
How long does fitting take? Roughly 90 minutes for a technician working with hand tools; the second installation on the same model typically takes under an hour.
Is a foot sensor included? Yes, the sensor and its bracket ship in the same carton and can be left unconnected if a buyer prefers key-only operation.
Packing, Testing and Support
Each set leaves our line only after a full function test covering motor load, stroke timing, latch handshake, reversal force and sensor calibration. Cartons measure 78 x 21 x 19 cm for a single set or 81 x 25 x 36 cm for two sets, lined with foam and closed with a moisture barrier bag. Air, sea and express options are all available, OEM printing on cartons and manuals starts at 200 sets, and our technical desk replies to fitting questions in English within one working day.