Aftermarket Power Tailgate Retrofit Kit Kick Sensor Tailgate for Dongfeng Fengshen Aeolus AX7 Soft Close
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| Voltage: | 12V DC | Travel Time: | About 7 Seconds |
| Cycle Life: | 50000 Operations | Temperature Range: | -30 C To +70 C |
| Material: | Aluminium Alloy, ABS, Galvanised Steel | Control Ways: | Remote Key, Dash Button, Rear Handle, Kick Sensor |
| Actuator Type: | Geared Brushless Motor, Two Struts | Safety Logic: | Anti-pinch Reverse, Current Limit, P-gear Interlock |
| Height Memory: | Two Preset Opening Heights | Installation: | Bolt On Original Fixing Points, No Drilling |
| High Light: | Electric Tailgate Lift Kit,Auto Car Lift,Electric Car Trunk |
||
Aftermarket Power Tailgate Retrofit for Dongfeng Fengshen Aeolus AX7
The Aeolus AX7 carries a tall, heavily glazed tailgate, and closing it by hand every day puts strain on the shoulder and on the factory latch. This retrofit kit removes that effort completely. A pair of motorised struts replaces the original gas stays, a controller reads the factory latch signals, and the hatch opens or closes at the touch of a button - without drilling, without cutting the original loom, and without changing the appearance of the rear end.
Who This Kit Suits
Workshops that already handle AX7 service work can offer the conversion as a fixed-price accessory, while distributors can stock one part number that covers the whole Fengshen AX7 range. Because the kit follows the original fixing points, a technician needs only hand tools and about one and a half hours to complete the job, and the conversion is fully reversible if the vehicle is later sold.
Feature Highlights
- Electric Tailgate Lift Kit: Twin motorised struts lift the hatch under power, with slow-start and cushioned-stop control so the panel never slams.
- Auto Car Lift: The hatch can be raised from the remote key, an optional dash button or the rear handle switch, and it closes with the same single press.
- Electric Car Trunk: A foot-kick sensor under the bumper opens the tailgate when both hands are full, and the closing button sits inside the panel for easy reach.
- Kick sensor tailgate: The sensor is calibrated for the AX7 bumper height, so a normal sweeping motion triggers it while road spray and passing animals do not.
- Tailgate soft close kit: The final travel is drawn in electrically, protecting the latch, the seals and the paint around the striker.
- Anti-pinch safety: Force sensing reverses the panel immediately when resistance appears, and the system stays inactive unless the gear selector is in P.
- Height memory: Two preset opening heights can be stored, useful for low-ceiling car parks and for drivers of shorter reach.
Technical Data
| Parameter | Value |
|---|---|
| Vehicle Application | Dongfeng Fengshen Aeolus AX7 |
| Rated Voltage | 12V DC |
| Actuator | Geared brushless motor, two struts per set |
| Full Travel Time | About 7 seconds |
| Operating Triggers | Remote key, handle switch, dash button, foot sensor |
| Safety Logic | Anti-pinch reverse, current limit, P-gear interlock |
| Structure | Aluminium tube, ABS housing, galvanised steel brackets |
| Temperature Range | -30 C to +70 C |
| Cycle Rating | 50,000 operations tested |
| Warranty | 24 months |
Delivery Scope
A complete set ships with two powered struts, one control unit, left and right mounting brackets with hardware, the plug-in harness, a kick sensor with bracket, a fuse, cable ties and a photo-illustrated fitting guide. Everything is packed in a foam-lined export carton; buyer-branded boxes and manuals are available for volume orders.
Ordering Notes
Samples start at one set so buyers can confirm bracket fitment on a real vehicle before bulk purchasing. Mixed containers with other Fengshen models can be arranged, and our technical desk answers installation questions in English within one working day.