Retrofit Auto Power Tailgate Hands-Free Liftgate Struts Kit OEM Supported for GAC Trumpchi GN6 M6 Pro MPV
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| Model: | GAC Trumpchi M6 Pro / GN6 MPV | OEM/ODM: | Support From 15 Sets |
| Actuator Force: | 580 N Per Side | Stroke: | 360 Mm |
| Door Mass Supported: | Up To 42 Kg | Power: | 12V DC, 15A Fused |
| Open Close Time: | 7 S Open, 6 S Close | Water Protection: | IPX5 |
| Kick Sensor: | Optional Foot Sensor Bar | Warranty: | 24 Months |
| High Light: | Automatic Tail Gate Lift,Auto Open Trunk System,Car Electric Trunk Kit |
||
Power Tailgate Struts Kit for the GAC Trumpchi M6 Pro / GN6
The M6 Pro is sold as the GN6 in several export markets. This kit covers both names and both body layouts: the factory gas springs are replaced by electric actuators, and a control module adds key, switch and foot-sensor operation.
One Kit, Two Market Names
Buyers in the Middle East and Africa usually see this MPV badged GN6, while other markets use M6 Pro. The hinge geometry and boot loom are the same, so a single reference covers both. Please state the market name on the order so the carton label and manual match what the workshop expects.
Highlights
- Hands-free opening with the optional foot sensor bar, useful for a family MPV.
- OEM signal support: factory remote, cabin switch and tailgate button all work.
- Struts rated 580 N per side for the M6 Pro tailgate mass.
- Damped closing stage so the lid is pulled into the latch rather than dropped.
- Obstacle reverse on hall feedback, with a warning beep before movement.
- Stored opening height for low car park ceilings.
Specifications
| Item | Value |
|---|---|
| Vehicle | GAC Trumpchi M6 Pro / GN6 (MPV) |
| Actuator force | 580 N per side |
| Stroke | 360 mm |
| Door mass supported | Up to 42 kg |
| Power | 12V DC, 15A fused |
| Open / close time | 7 s / 6 s |
| Water protection | IPX5 |
| Noise | Under 56 dB |
| Cycle test | 45,000 operations |
| Warranty | 24 months |
Fitment Notes
Brackets are handed and marked. The rear headliner trim and quarter panel clips come off with plastic tools, factory ball studs are reused, and bracket bolts are torqued to 22 Nm. The harness passes through the original boot grommet and ends in plugs that mate with the factory loom. Expect roughly two hours for a first installation.
Logistics
Carton size 84 x 24 x 22 cm, one set per carton, three cartons per master carton. Struts in EPE sleeves, hardware counted into numbered bags by side, printed manual and wiring schematic included. Container and pallet loading are available, and cartons can carry buyer SKU and barcode.
Service
Units are cycled with a simulated 42 kg door load before packing. Replacement actuators, modules and switches are stocked for the warranty period, and our team supports fitting questions in English by e-mail or video call.