Automatic Power Tailgate Trunk Boot Kit Electric Trunk Lift Kit Kick Sensor Tailgate for GAC Aion V Plus Upgrade
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| Model: | GAC Aion V Plus | OEM/ODM: | Accepted From 20 Sets |
| Actuator Force: | 550 N Per Strut | Stroke: | 320 Mm |
| Voltage Fuse: | 12V DC / 15A | Standby Current: | 2 MA |
| Harness Length: | 2.4 M Per Side | Humidity Range: | Up To 95% RH |
| Box Marking: | Custom Part Number And Barcode | Warranty: | 24 Months |
| High Light: | Electric Car Trunk System,Auto Car Lift Kit,Automatic Trunk Opening Kit |
||
Power Tailgate Kit for the GAC Aion V Plus
The V Plus is a family SUV that gets loaded constantly. This kit gives its rear door electric drive, so school bags, shopping and suitcases go in without anyone pulling a heavy lid down by hand.
Why Owners Choose This Kit
Factory power boots are usually reserved for the top trim. This set brings the same behaviour to any V Plus: the door opens on a key press, closes on a key press, and stops the moment it touches something. Nothing about the original lock, alarm or central locking changes, and the manual release still works if the battery is ever disconnected.
Main Components
Two electric actuators rated at 550 N, a control module with the V Plus harness, left and right hinge brackets, a cabin switch, a wiring loom with fuse tap, and an optional kick sensor bar for hands-free opening.
Working Mode
The module samples the vehicle state before acting. It only responds while the selector is in P, and it checks the actuator load every few milliseconds so a child, a bag or a wall stops the movement immediately. Three beeps precede each cycle, and the final closing stage is damped so the latch is pulled, not slammed.
Specification
| Item | Data |
|---|---|
| Vehicle | GAC Aion V Plus |
| Actuator force | 550 N per strut |
| Stroke | 320 mm |
| Voltage / fuse | 12V DC / 15A |
| Standby current | 2 mA |
| Harness length | 2.4 m per side |
| Humidity range | Up to 95% RH |
| Temperature range | -30°C to +80°C |
| Warranty | 24 months |
Fitment & Wiring
Designed around the V Plus hinge layout. Brackets locate on the factory bolt holes, the harness runs through the original boot grommet and ends in moulded plugs, so no wire is spliced. The fuse tap takes power from the cabin box and the ground point sits under the rear quarter trim.
Who It Suits
Accessory wholesalers covering the Aion range, workshops doing EV retrofit work, family buyers of mid trims, and fleet operators whose drivers load the boot many times per shift.
Service Programme
Sets are checked on a load rig before packing, and the module firmware is matched to the V Plus body controller. Cartons can carry customer part numbers and barcodes. Spare actuators, switches and harnesses stay available for the whole warranty period, and our engineers answer fitting questions by e-mail or video.