Electric Tailgate Retrofit Kit Automatic Power Tailgate Boot Kit for GAC Aion ES Automatic Boot Opening System
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| Model: | GAC Aion ES | OEM/ODM: | Support, Logo From 30 Sets |
| Actuator Type: | Electric Strut With Internal Clutch | Peak Current: | 5.5A |
| Ingress Protection: | IP55 | Temperature Range: | -35C To +85C |
| Approvals: | CE, RoHS | Buzzer Alert: | Three Beeps Before Travel |
| Control Inputs: | Remote, Dash Switch, Handle, Gesture Sensor | Warranty: | 24 Months |
| High Light: | Automatic Trunk Lift,Auto Tailgate Kit,Car Electric Trunk Kit |
||
Power Tailgate Boot Kit for the GAC Aion ES
Manual rear doors on the Aion ES become fully powered with this retrofit set. Two electric struts replace the original gas springs, and a control module handles the logic: open on command, close on command, stop and reverse on contact.
Feature Matrix
| Function | Behaviour | Benefit |
|---|---|---|
| Power opening | Key, dash switch or handle command drives the struts | No lifting a heavy boot lid by hand |
| Power closing | Motor pulls the door down to the latch | No more slamming, latch lasts longer |
| Obstacle reverse | Stops and reopens on resistance | Protects people and cargo |
| Buzzer warning | Three short beeps before travel | Clear warning to bystanders |
| Park interlock | Disabled outside P position | No accidental opening while moving |
| Height memory | Opening point stored by the user | Safe under low ceilings |
| Manual mode | Hand operation still possible | No lock-in during power loss |
Technical Specifications
| Item | Detail |
|---|---|
| Compatible Vehicle | GAC Aion ES |
| Power Supply | 12V DC vehicle system |
| Peak Current | 5.5A |
| Actuator Type | Electric strut with internal clutch |
| Travel Time | 7 seconds typical, full open to close |
| Control Inputs | Factory remote, dash switch, tailgate handle, optional foot sensor |
| Ingress Protection | IP55 |
| Temperature Range | -35°C to +85°C |
| Approvals | CE, RoHS |
| Warranty | 24 months |
Fitting Notes
The kit is prepared for the Aion ES body. Brackets bolt to the original hinge points, the harness follows the existing boot loom and terminates in plug-in connectors. No painting, cutting or welding is required, and the factory latch, central locking and alarm remain in control of the lock state.
Typical Buyers
Importers adding EV accessories to their catalogue, workshops serving Aion owners, taxi and car-sharing operators who need fast boot access, and end users who want powered boot operation on a base trim car.
Packing & Delivery
One set per carton measuring 78 x 23 x 20 cm. Struts are wrapped in EVA foam, the module sits in a rigid insert, and hardware is packed in numbered bags. Six cartons are stacked per export pallet. Orders normally leave the factory within 8 to 15 working days depending on quantity and packaging option.