Retrofit Power Tailgate Upgrade Smart Tailgate Kit Automatic Boot Opening System for Suzuki Ertiga NC
Trading Properties
Basic Properties
Mr. Wong
- +86 190 6808 0629 Contact Us
| Voltage: | 12V DC | Motor Type: | Brushless DC Gear Motor |
| Opening Speed: | Approx. 8 Seconds | Lift Force: | Up To 320 N Per Strut |
| Material: | Aluminium Alloy / Reinforced Plastic | Waterproof Rating: | IP54 |
| Operating Temperature: | -30C To +80C | Cycle Life: | Over 100,000 Cycles |
| Noise Level: | Under 55 DB | Control Methods: | Remote Key, Dashboard Button, Tailgate Handle Switch, Foot Sensor |
| High Light: | Suzuki Ertiga NC electric trunk lift,Ertiga NC automatic trunk opener,Auto open trunk power kit |
||
Retrofit Power Tailgate Upgrade Smart Tailgate Kit Automatic Boot Opening System for Suzuki Ertiga NC
Retrofit this Suzuki Ertiga NC with a power tailgate upgrade that turns the manual rear door into a smart tailgate kit. A 12V brushless gear motor raises and lowers the boot from the original remote or an in-cabin switch, while an automatic boot opening system adds foot-sensor access for loading when both hands are full. The set arrives as a complete retrofit package: motor, control unit, lift struts, vehicle-specific brackets, harness and fixing hardware, so a garage can complete the job in one visit with no welding or cutting.
Feature Highlights
- Smart tailgate kit: an OEM-style control module manages open, close and stop commands.
- Automatic boot opening system: a kick under the rear bumper releases the door for hands-free loading.
- Power tailgate upgrade: converts a base manual boot into a powered, height-programmable unit.
- Multiple release inputs: key fob, dashboard push-button, outer handle and foot sensor.
- Anti-pinch safety: the door reverses on contact and stays inactive unless the gear lever is in P.
- Memory height: a preferred opening level can be stored for low ceilings.
- Factory features preserved: the original latch, central locking and manual override remain usable.
Technical Specification
| Item | Detail |
|---|---|
| Compatible Vehicle | Suzuki Ertiga NC |
| Voltage | 12V DC |
| Motor Type | Brushless DC gear motor |
| Travel Time | About 8 seconds |
| Release Inputs | Remote key, cabin button, tailgate handle, foot sensor |
| Safety | Anti-pinch reverse, P-position interlock, over-current cut-off |
| Materials | Aluminium alloy, reinforced plastic |
| Service Life | Over 100,000 cycles |
Fitment
Brackets and connectors are made for the Suzuki Ertiga NC so the retrofit follows the factory hinge points and the plugs connect to the original wiring without splicing. The upgrade suits MPV owners, ride-hailing fleets, rental companies and dealers who want power-assisted boot access.
Packing & Support
Each set is packed with moulded foam in a double-wall export carton and the fasteners are sorted into labelled bags. Units are load-tested and continuity-checked before dispatch. A 24-month warranty against manufacturing defects applies, and remote installation support is offered to overseas buyers.